Holecut Professional HC 60


EHRT Holecut Professional HC 60 Punching Machine


  • Easy Programming – The punching machine can be optimally linked with the bending machine so that production can be carried out based on a single line production file from a common database.
  • Marking Systems – Inkjet printer, label printer, needle engraver.
  • 8 Tool Stations – Max 42 punches using the 6 Station Multi-Tool, plus a cutting tool
  • Thread Forming Stations – Up to 2 thread formers possible.
  • Ejector – Several ejector positions can be set up on the sorting belt

The Professional Line punching machines from EHRT are characterised by their outstanding robustness even under high loads. The Professional line of machines, for example, can operate a 3-shift system no problem.

The Punching Machine Professional Series is fitted with three CNC controlled axis, allowing for production parts to made with amazing accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. The operator is only responsible for starting the machine, feeding in the material and then removing the production parts. Feeding in the material and removing the production parts can also be automated as much as possible with more options. This makes the machines extremely cost-effective.

Software solutions from EHRT enable a customised and smooth production flow. In addition, the punching machines can be optimally linked with the bending machines so that production can be carried out based on a single production file from a common database.
The PLC machine controller from Beckhoff enables machine maintenance and software updates via remote access.

Specials of the HC 60

With the Professional Line, each tool station is configured by default in such a way that either a Maxi Tool or a 6 station Multi-Tool can be used. EHRT’s tool system allows simple and fast tool changes, minimising setup times. When using the 6 station Multi-Tools, the machine can be fitted with 42 punches plus a cropping tool.

With the Professional machines, up to 2 Single Taps (thread formers) can be used.

The HC 60 is fitted with a hydraulic cylinder with a power of 560 kN.

With Professional series machines, it is possible to punch material that is 15-260 mm wide and 3-20 mm thick.

During processing, the workpieces are clamped laterally by a clamp in order to minimise any damage to the workpiece. Furthermore, thanks to the special clamp, punching can be carried out over the entire workpiece.

The tools are fitted with particularly strong springs which provide high retraction forces. Thus you can operate with small cutting clearances even in thick metal bars.
Afterwards or during production, it is possible to label the workpieces with different systems. This can be used for additional production steps or also for your clients’ specifications.

More Options

  • Aluminium lubrication
  • Thread formers
  • Punching of profiles
  • PunchPRO nesting software
  • Automatic loading system
  • Gantry automatic storage
  • Workpiece marking


Holecut Professional Series

professional diagram

Need More Information?