The Tiger electric tapping machine is capable of tapping holes from M2 – M27.

It is a 240 volt model. The working height of the machine can be increased by 130mm to give extra clearance for work pieces.

It can be secured to a workbench by three M8 bolts through the pre drilled base, or secured by a clamp sold separately, which will allow it to be moved around the workshop.

The base can rotate freely giving a maximum radius of 1020mm.

It uses a modular system where the speed and torque can be achieved by selecting from the seven different speed modules. Depending upon the size of hole to be tapped.

 

For each thread size a tap chuck is required, these can be supplied either with or without a clutch, depending if you are tapping through or blind holes. The clutch type holders allow the tap to bottom out in the hole and slip to prevent the tap from breaking. The modules and tap chucks are manufactured with a quick change operation. Each module and or tap chuck can be changed in a matter of seconds.

SOLD

The price is £4000.00 + VAT

(excluding modules & tap chucks)