comac

Mignon 00M / 00E

ft_mignon_00_m1
  • Recommended for bending small tubes and sections into very tight diameters
  • Three driving rolls
  • Manual / electric model

The Mignon 00M / 00E is the smaller of the two Mignon models and is built around 47 mm rolls. Its rated bending capacity is tube Ø 16 x 1.5 mm, which it can bend to an inside diameter of 150 mm. Flat bar up to 15 x 4 mm bends to a 180 mm inside diameter, or flat bar on edge up to 20 x 6 mm to 120 mm. Square bar up to 8 x 8 mm goes to 150 mm and round bar up to 10 mm to 120 mm. It is offered as a manual or electric model and is recommended for bending small tubes and sections into very tight diameters.

Technical Specifications

mignon oom
mignon oom profile

Need More Information?