This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm. The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose. Taps and shank tooling fit to the motor’s quick-change system by means of tapholders.
The Roscamat 200 is a pneumatic tapping machine tapping threads from M2 to M14 (metric) or Nr2 to 9/16″ (UNC) using the TS VII 350 rpm air motor. Using the 750 rpm air motor it can tap threads of M2 to M10 (metric) or Nr2 to 3/8″ (UNC). The TS VII air motor uses 600 litres/minute of compressed air. The balanced arm of the Roscamat 200 keeps the motor head perpendicular to the work, thus taps go in square. The work area is covered with a working radius of 935 mm and working height of 660 mm. The Roscamat 200 is equipped with a quick-change system for the taps. An orientable headmember is available as optional equipment.
Technical Specifications
| Pneumatic Motor TS VII | 600 Lts/min | |
| TS VII-350 rpm Tapping Capacity | Metric: M2 - M14 | UNC: Nr2 - 9/16" |
| TS VII-750 rpm Tapping Capacity | Metric: M2 - M10 | UNC: Nr2 - 3/8" |
| Working Area | Radius: 935 mm | Height: 660 mm |
| Optional Equipment | Orienteable Headmember |