Tauring Alpha Series of ring rolling machines is the latest design from Tauring which has been proven to be beneficial in its design by allowing asymmetrical bending to be achieved with the bending rolls operating on slide ways rather than the old style pivot hub system.
The Alpha machines are also available with independent tension brace rods for increased performance.
Completely hydraulic bending machine with 3 driving rolls and separate dual adjustment.
The upper roll has a fixed housing.The geometry of this machine allows the bending not only of large-sized section bars, but also small section bars with very reduced bending radii.
PQ 10 is the latest Tauring electronic interface designed to meet the management requirements of bending machines with more than 3 seperate axis. It has a touch screen display and Microsoft Windows CE operating system. It is anintuitive and easy sytem to use for the operators allowing the sequential multi positioning of axis, and can carry out the movement of several axis continually and in sequence up to the required dimensions. It is possible to set up to 10 dimensions for each axis.
The PQ10 also includes an advanced analysis system for self diagnosis of any failures and/or maintenance operations on the control circuit. Upon request the bending machine can be supplied with a tele-assistance system for prompt service in any part of the world.
Because of its specific characteristics, this machine is ideal for use in large and medium steel structural work.
One of the more significant characteristics of this machine is the application of independent supports (s.i.) at the end of the shafts. These independent supports enable the shafts to work in a restrained manner and therefore not jerking, as in the traditional bending machines, thus discharging the deflection forces on the slides and, as a consequence, on the body of the machine.
In this way the capabilities of the bending machine are considerably increased (up to three times) making it possible to carry out machining operations that are usually destined for higher level cutting machines still maintaining complete working freedom, without creating any form of obstruction for the insertion and unloading of the material between the bending rolls. Also, these rolls can be easily adjusted with no need to remove the fixture.
The written maximum performances are with bending machine equipped with Independent Support (SI).
|Maximum Shaft Working Length||mm||400|
|Shaft Roll Speed||rpm||1,5-6|